Search

시험용 분체 정밀 분체 분석을 위한 높은 정확도

입증 된 RETSCH 시험용 분체는 안정적인 분체 결과를 위해 높은 안정성의 견고한 스테인리스 프레임으로 구성되어 있습니다. 메쉬 특정 요구 사항에 세심한 주의를 기울였으며, 각 시험 체의 직물 구조는 프레임에 정확하고 견고하게 결합됩니다. 각 시험 체의 개별 레이저 음각은 완벽한 추적성을 갖춘 명확한 라벨을 제공합니다.

For reliable and reproducible results in the context of quality assurance, the use of test sieves which correspond to the standards ISO 3310 or ASTM E11 is essential. The technical requirements and monitoring for test sieves are laid down in these standards. If a laboratory carries out quality control in accordance with ISO 9000 ff, the sieve shakers, test sieves and all other involved instruments (e.g. scales) have to be subjected to test agent monitoring. The standard ISO 3310 stipulates which tolerances are allowed for the wire diameter (d) of the woven sieve fabric and for the nominal mesh width (w) of the apertures.

For each mesh width w the value y is defined which indicates how much the mean real mesh width may differ from the nominal mesh width. This can be demonstrated with a 63 μm sieve. The tolerance y for a sieve with the nominal mesh width 63 μm is ±3.7 μm. This means that the mean value of the mesh sizes must lie between 59.3 μm and 66.7 μm. A look at the graph that helps to understand why the knowledge of the real mesh width is so important for sieve analysis: if the mesh size is 63 μm, 40% of the sample are smaller than 63 μm. If, however, the mean real mesh width is 66.7 μm, 44% of the particles are smaller than 66.7 μm. If a user does not know the real mesh width, he would assume that 44% of the sample is smaller than 63 μm.

Schematic of a sieve mesh

 

In addition to the requirements laid down by the standard, RETSCH test sieves offer significant benefits:

 

The unique manufacturing process of RETSCH test sieves with a one-piece stainless steel sieve frame guarantees unrivaled stability and consistency for your sieving application. Paying close attention to mesh size and other specific requirements, the sieve fabric is precisely joined into the frame. Using a unique technology, which is only found in RETSCH test sieves, the fabric is then permanently and reliably tautened. The complete sieve is made from high alloy corrosion-resistant steel and is suitable for all areas of laboratory analytics, including pharmaceuticals and food. Each individual sieve passes a close optical inspection process ensuring conformity to standards. The sieve data (nominal mesh width, serial number, manufacturer, standard, dimensions) are laser engraved on the sieve frame and cannot be manipulated nor removed.

Tolerance y of the nominal mesh

Tolerance y of the nominal mesh width of 63 µm acc. to ISO 3310-1 and its consequences