Vibratory Disc Mill RS 300 XL

Close

Language:


The Vibratory Disc Mill RS 300 XL is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. It is possible to process 1, 2, 3 or 4 samples simultaneously. Thanks to the robust universal drive shaft, which sets the grinding jar into a 3-D motion, this mill accepts grinding set weights of up to 30 kg. The closed grinding system guarantees complete processing of the sample.

Just like the RS 200, the RS 300 XL with its robust design has proven to be ideally suitable for applications in geology, mineralogy, metallurgy, as well as in the building materials sector (cement) and in power plants.

Due to the high end fineness and speed the RETSCH Vibratory Disc Mills are the perfect choice when it comes to preparing samples for spectral analysis.

응용

시멘트, 시멘트 클링커, 세라믹, 석탄, 코크스, 콘크리트, 강옥, 전자 부품, 유리, 금속 산화물, 광물, 광석, 식물 재료, 실리케이트, 슬래그, 토양, ...

장점

  • reproducible results and homogeneous samples thanks to universal drive shaft (3D vibration of grinding sets)
  • speed: 912 min-1
  • short grinding times
  • autoreverse function (left/right rotation)
  • programmable interval function (start/ stop automatic)
  • wide range of materials for contamination-free grinding
  • grinding jar volumes from 100 ml up to 2,000 ml
  • closed and noise-insulated grinding chamber
  • pneumatic grinding-jar clamping (with air-pressure) for convenient and safe handling
  • additional security feature: mill only starts if the pneumatic pressure is correct
  • optional Autolifter for ergonomic lifting of heavy grinding sets

특징

응용 분야 크기 감소, 혼합, 분쇄
응용분야 건축 자재, 환경 / 재활용, 지질학 / 야금, 유리 / 세라믹
투입 시료 약간 단단함, 단단함, 취성, 섬유질
크기 축소 원리 압력, 마찰
최대 투입 크기* < 20 mm
최종 분말 입도* < 20 µm
시료 일괄 처리량* 35 - 2,000 ml
50 Hz (60 Hz)에서 속도 912 min-1
분쇄 도구 재질 크롬 스틸, 경화 스틸, 탄화 텅스텐, 산화 지르코늄, 스틸 1.1740 (heavy-metal free 분쇄 용)
분쇄 용기 크기 100 ml / 800 ml / 1,000 ml / 2,000 ml
분쇄 시간 설정 디지털, 00:00 에서 59:59
구동 3상 모터
구동 전력 2.2 kW
전원 공급 데이터 다른 전압
전원 연결 3상
안전 보호 코드 IP 40
폭 x 높이 x 깊이 닫혔을 때 1400 x 1460 x 730 mm
중량 ~ 415 kg (분쇄 세트 미포함)
표준 CE

주의하세요:
*투입 재료와 장비 환경, 설정에 따라

작동 원리

The vibratory disc mill comminutes by impact and friction. The grinding set is firmly attached to the vibration plate with a pneumatic quick clamping device. The plate with the grinding set is subjected to 3-D vibrations.

The sample is crushed by extreme pressure, impact and friction generated by centrifugal forces acting on the grinding rings in the dish.The vibrations are produced by a frequency controlled 2.2 kW 3-phase motor.

기술적 변경 및 오차가 있을 수 있습니다